Introduction to STM32F411RET6
The STM32F411RET6 is a high-performance microcontroller from STMicroelectronics. It is part of the STM32F4 series and is built on a 32-bit ARM Cortex-M4 core. The microcontroller offers a rich set of features and peripherals, making it suitable for a wide range of applications, including industrial control, consumer electronics, and motor control.
Features
The STM32F411RET6 microcontroller offers a rich set of features, including:
- 32-bit ARM Cortex-M4 core running at up to 100 MHz
- 512 KB Flash memory and 128 KB SRAM
- Ethernet MAC, USB OTG FS, and CAN interfaces
- 12-bit ADC with up to 16 channels and 2.4 MSPS conversion rate
- Multiple timers and PWM channels
- Low-power modes for energy-efficient operation
Peripherals
The STM32F411RET6 microcontroller offers a range of peripherals, including:
- Ethernet MAC: The microcontroller features an Ethernet MAC interface that supports 10/100 Mbps operation. The interface is compliant with IEEE 802.3 and supports both full- and half-duplex operation.
- USB OTG FS: The microcontroller features a full-speed (FS) USB OTG interface. The FS interface supports up to 12 Mbps operation and is compliant with USB 2.0.
- CAN interface: The microcontroller features a CAN interface that supports both CAN 2.0A and CAN 2.0B protocols. The interface supports up to 1 Mbps operation and features advanced filtering and error detection capabilities.
- ADC: The microcontroller features a 12-bit ADC with up to 16 channels and a 2.4 MSPS conversion rate. The ADC supports both single-ended and differential inputs and features advanced sampling and trigger capabilities.
- Timers and PWM channels: The microcontroller features multiple timers and PWM channels, including 14 general-purpose timers, 2 advanced-control timers, and 4 basic timers. The timers support a wide range of modes and features, including PWM, input capture, and output compare.
Development Tools
The STM32F411RET6 microcontroller is supported by a range of development tools, including:
- STM32CubeMX: A graphical tool that allows developers to configure the microcontroller and generate initialization code.
- STM32CubeIDE: An integrated development environment (IDE) that provides a complete development environment for the microcontroller, including code editing, compilation, and debugging.
- STM32 Nucleo-64 board: A development board that features the STM32F411RET6 microcontroller and provides access to all the microcontroller's peripherals.
Specifications
The following table provides an overview of the key specifications for the STM32F411RET6 microcontroller:
| Parameter | Value |
| Core | ARM Cortex-M4 |
| Clock speed | Up to 100 MHz |
| Flash memory | 512 KB |
| SRAM | 128 KB |
| Ethernet MAC | 10/100 Mbps |
| USB OTG FS | USB 2.0 |
| CAN interface | CAN 2.0A/B |
| ADC | 12-bit, up to 16 channels, 2.4 MSPS |
| Timers | 14 general-purpose, 2 advanced-control, 4 basic |
Conclusion
The STM32F411RET6 microcontroller is a high-performance microcontroller that offers a range of features and peripherals suitable for a wide range of applications. Its 32-bit ARM Cortex-M4 core, combined with its advanced peripherals and low-power modes, make it suitable for a wide range of applications, including industrial control, consumer electronics, and motor control. With support from a range of development tools, including STM32CubeMX and STM32CubeIDE, developers can quickly and easily get started with the microcontroller and take advantage of its full capabilities.
|
|
Chip ic distributor ARM MCU STM32F411RET6 STM32F411 STM32F LQFP-64 microcontroller One-stop BOM service Images
|
